Its icon resembles a black PS3 controller. By default, you can open downloaded files from within your web browser, from your "Downloads" folder. Install ScpToolKit.
If the toolkit mentions that you're missing "prerequisites" needed to run the program, click Next until the prerequisites begin installing. Click Next. Click Install. Double-click the ScpToolkit Driver Installer program.
It's in the file in which you installed SCP Toolkit. It has an icon that resembles a USB cable. Uncheck the "Install DualShock 4 Controller" box. This option is on the left side of the driver installer window. Since you're installing a PS3 controller e. Also uncheck the box next to "Bluetooth" if your controllers are wired e. A good rule of thumb here is to uncheck a box next to anything you aren't using. If you're using Windows Vista, you'll need to check the box next to "Force Driver Installation" in the middle-left side of the window.
This option is on the right side of the window. You'll select your controller from here. You'll see a list of all devices attached to your computer e. Your PS3 controller is the option marked "Wireless Controller Interface [number] " where the number pertains to the USB port to which the controller is attached. If you're using a non-wired controller, you'll need to select the USB device you're using to facilitate the connection under the "Bluetooth" section above the "DualShock 3 Controllers" drop-down box.
It's on the right side of the driver installer window. Doing so will prompt SCP Toolkit to begin installing your controller's drivers, which should take less than five minutes on any compatible PC. Once the installation is complete, you'll hear a confirmation noise. At this point, your controller's drivers have been installed and you are ready to begin using your controller with PC games. I did everything as instructed. But at the final step on Better DS3, it did not give me the opportunity to click the Apply button.
What can I do? You have to select both profile and controller to have the ability to click Apply. Not Helpful 36 Helpful What do I do if it doesn't have a "save profile" message at the bottom of the window and I am on Windows 7? Set the size to "smaller" and you'll get logged out. Log back in, and you'll find the "Save" button.
Not Helpful 19 Helpful Yes, if you have Bluetooth support. Unless otherwise stated, ScpToolkit starts automatically every time Windows is started. You can also unplug the controller for wireless use. Windows will synchronize it via Bluetooth within a few seconds and confirm that the process worked via a popup. ScpToolkit allows the user to tinker with some of the options and customize the PlayStation 3 controller quite a bit.
How to access the options. Click on it to launch the tool. This means that the button control scheme will not be registered in some games. In other words, hitting X may not be the same as hitting X. Fortunately, most games give you permission to customize the controls and assign certain buttons as you wish. You have 25 keys at your disposal, and many games need way more controls.
With reWASD, you can create the combos of any complexity. Start with something simple to copy-paste the files, end up with a combo with Breaks, Pauses, and use them for quick edits in Desktop applications. What about the Toggle and Turbo mappings?
Toggle starts firing the mapping after the first click and stops after the second one. Turbo executes the mapping with a customizable pause as long as you hold the button. Both are very powerful, and once you try them, you can never go back ;. A good tip while setting up PS3 controller to PC is to make it as intuitive as possible. Autodetect permits adding associated files to game Profiles in reWASD, and activates certain configs when the game is in focus.
Set it and forget it! Or what about some useful commands? Lock the PC, turn off your controller, save screenshots to a customizable folder in one click.
Anything you need is at the tip of your fingers! Let the controller mapping be emulated repeatedly while you press and hold the button with Turbo or start and stop the emulation by a tap with Toggle. And if you simply prefer the feel of Sony's older controllers over the redesigned Dualshock 4, this is the perfect controller for playing those classic Final Fantasy games on Steam.
Note: Steam actually has native support for the DualShock 3, meaning you can simply plug the controller in and set it up through the Big Picture mode Controller settings menu. However, Steam does not support the DualShock 3's gyro controls or more importantly! Follow this guide to get the PS3 controller working on PC with those buttons working, too.
Download the software linked above, and start by installing the four Microsoft packages. If you're on a Windows 7 PC, you'll also need to install the Xbox controller driver. On Windows 8 and 10, it's already built in! Now we can start making it work. Bluetooth installation note: if you also want to be able to use the controller wirelessly, make sure you have a Bluetooth dongle plugged in or your motherboard's Bluetooth enabled. ScpToolkit notes you need a Bluetooth 2. Download ScpToolkit and run the installer.
After accepting the terms and choosing your install location, you'll get a menu of all the options to install, as in the screenshot above. I recommend leaving this to the default. Click Install to begin the installation. After about 30 seconds, ScpToolkit will be installed, and you'll see this screen, with a big green button that says Run Driver Installer.
0コメント