How to Install Inside Mount Blinds on Vinyl Windows If you have determined you have enough room to inside mount blinds on your vinyl windows, follow these steps to hang them up. Unpack the blinds and get the mounting brackets. Position them so they are flush and level with the window frame, and then mark the screw holes using a pencil. If your blinds include a valance, be sure to make an allowance for that, as well, before marking the screw holes. Attach first one bracket and then the other to the wall using a drill or screwdriver.
If using a screwdriver, create pilot holes first by tapping a nail with a hammer and then removing the nail. Make sure the brackets are aligned, and then tighten the screws.
If the window needs additional support brackets, determine their placement using a tape measure and a leveler, mark the screw holes with a pencil, and mount them using the same steps outlined above. Attach the valance clips to the front of the budget blinds before mounting them. Make sure the clips do not interfere with any mechanisms at the top. Set the headrail into the brackets. Close the end brackets and make sure they have snapped securely in place.
Finish assembling the valance by attached the small side pieces to the main front piece. Snap the valance into the clips; first the top, then the bottom. Test your new blinds to make sure they work, and enjoy! Leave a comment Name. Related Articles. Did this summary help you? Yes No. Log in Social login does not work in incognito and private browsers. Please log in with your username or email to continue.
No account yet? Create an account. Edit this Article. We use cookies to make wikiHow great. By using our site, you agree to our cookie policy. Cookie Settings. Learn why people trust wikiHow. Download Article Explore this Article parts. Tips and Warnings. Things You'll Need. Related Articles. Article Summary. Part 1. Measure your windows. You need to do this to make sure that you buy the correct size of blind.
Use a measuring tape to determine the size of the window. You can either mount your blinds on the inside or on the outside of the casing. If you hang your blinds on the outside, your window and the blinds will look larger.
Hanging the blinds on the inside gives your window a slimmer look. Inside mounts also allow more light to shine around the edges of the blinds. Measure the exact length from the top of the casing to the bottom of the casing or to the sill if your window has one.
Purchase your blinds according the measurements you made. There are many different kinds of blinds to choose from--vinyl, PV, aluminum, wood--and the choice you make will have to be based on personal preference. White blinds can give your space a nice, clean look. Make your mounting marks. Unpack your blinds and make sure all of the parts are there. If there are instructions that come with your blinds, follow them along with the steps listed here.
You will need to make some pencil marks so that you know where to place your brackets. Make a pencil mark right below the head rail on each side of the casing. Part 2. Open the bracket door and hold the end brackets in place. Place them inside the pencil marks you have made.
There are two open sides to the bracket--one of them should face out towards you, while the other should face in towards the center of the window. The bracket door must face towards the inside of the room. If your bracket door is tricky to use, consider trying to open it with one of your fingers and a screwdriver. Mark where you will be drilling. Using your pencil, mark the spots where you will need to drill your pilot holes there should be two of them. You should choose two diagonal holes to drill into so that your brackets are sturdier.
Take the brackets away and hold up a level to the two holes are even. Drill the holes for the screws. Each bracket comes with two screws. Replace the bracket and drill your screws into place.
Part 3. Snap the valance clips in place. Valance clips are used to attach the head rail to the valance. The valance is what covers the head rail and makes it look a bit more decorative. The valance clips should be snapped over the front lip of the head rail before the head rail is inserted into the bracket.
If this is the case, snap each valance clip into place next to the top of each ladder--not directly on top of it. If they are put directly over each ladder, the valance clips might get caught in the cords of the blinds. Place the head rail into the brackets. Once you have finished drilling the brackets into place, make sure the bracket doors are wide open and then insert the head rail into the brackets. When you have situated the head rail, snap the bracket doors closed.
You should hear an audible snapping noise. Attach the valance. Place the valance along the head rail in the position you would like it to be in. Rest it on top of the valance clips. When you have positioned it the way you would like it be, press gently down so that the valance clips snap into the valance, holding it in place.
Secure the blind wand. If your blinds came with a wand for opening and closing them, and it did not come pre-attached, attach it now. Karen Parziale. Take a look at the size of your windows first. If your bedroom has really big, sprawling windows, you might be better off choosing going with drapes.
0コメント