Security is always important; with a wireless network, it's even more important because your network's signal could be broadcast outside your home. If you don't help secure your network, people with PCs nearby could access info stored on your network PCs and use your Internet connection. Change the default user name and password. This helps protect your router. Most router manufacturers have a default user name and password on the router and a default network name also known as the SSID.
Someone could use this info to access your router without you knowing it. To help avoid that, change the default user name and password for your router. See the documentation for your device for instructions.
Set up a security key password for your network. Wireless networks have a network security key to help protect them from unauthorized access. See the documentation for your router for more detailed info, including what type of security is supported and how to set it up. In Windows 7 or Windows 8. Select Set up a new network , then choose Next.
The wizard will walk you through creating a network name and a security key. Write down your security key and keep it in a safe place.
You can also save your security key on a USB flash drive by following the instructions in the wizard. Use a firewall.
A firewall is hardware or software that can help protect your PC from unauthorized users or malicious software malware. Running a firewall on each PC on your network can help control the spread of malicious software on your network, and help protect your PCs when you're accessing the Internet. Learn why people trust wikiHow. Download Article Explore this Article methods. Related Articles. Method 1. Note that if buying a router, all routers are compatible with Windows XP.
It is wireless adapters that have varying levels of Windows XP compatibility. If your router isn't new, then turn it on and skip to "Detecting your wireless adapter" below. Plug your router into your internet socket if you want to share your internet. Enter your username and password from your router often "admin" and "admin" then your internet service provider.
Method 2. Your wireless adapter should be detected automatically by Windows XP. Method 3. If your connection appears in the Wireless Connection Manager then connect to it, otherwise run the wizard. Comcast Broadband Internet going through the Comcast provided cable modem which did go directly to my windows PC. It worked just fine. I bought a windows xp laptop with wireless Internet capability built-in and ready to go. In order to share the single internet connection, I installed a D-Link switch between the cable modem and the PC.
The Internet connection on the PC continues to work as it always did, but only through the switch. I also connected a wireless access point to the switch to receive the wireless transmission from the laptop. I configured the access point device as described with the installation instructions. So it is sitting there waiting for the laptop to establish a connection.
My question is, as much as possible, can someone give me a step-by-step set of instructions as to what needs to be done with the windows xp laptop to establish that wireless connection with the acess point device that is installed? Share Flag. All Comments. Collapse -. That should be Dalton 0 Votes. Poster rated this answer. If you have no wired or wireless network driver installed, you have no internet connection.
Installing Windows and finding a network driver has not been detected and installed can be a real cause for frustration. Although several sites list it just as an ethernet driver installer it does actually detect and install wireless drivers as well. After that the updater program will run and popup a small user interface with a list of network adapters on the system, if there is already a driver installed it will show the version number and date. To switch between adapters if you have more than one, click the green plus button and a selectable list will show on the right.
To install another driver select it from the right hand list to bring it to the main window, click it and go through the same process. It works on Windows XP, Vista, 7, 8 and 8. Snappy Driver Installer SDI is developed by a former coder of Driverpack Solution that became unhappy with the direction it was going and decided to create his own driver updater. It relies on Driver packs similar to those found at Driverpacks. To get the ethernet or Wifi driver for your offline computer SDI has to be run on a computer with an internet connection first, extract the downloaded zip and run the executable.
At the top it will say updates are available and to click on the bar to download, when you do that an Update window will pop up. Click OK and let the files download.
The driver s will begin to install and within a matter of seconds your network should be up and running complete with a working driver. Being based on driver packs, you can download all the packs you require to create your own complete offline driver package and let Snappy install all of your missing or outdated drivers. During testing it does indeed appear to be quite accurate with its detection routines which is good when it comes to correctly identifying more tricky drivers.
0コメント